Table of Contents
Advertisement
Chapter 4: Web-Based Management
Misc Configuration
In this page, you can change the default configuration for the 802.1x standard:
Figure 4-68: 802.1x Misc Configuration interface
This page includes the following fields:
OBJECT
Quiet Period:
TX Period:
Supplicant Timeout:
Server Timeout:
Max Requests:
Reauth period:
122
DESCRIPTION
Used to define periods of time during which it will not attempt to
acquire a supplicant.
Default time is 60 seconds.
Set the period the port waits for retransmit next EAPOL PDU during
an authentication session.
Default value is 30 seconds.
Set the period of time the switch waits for a supplicant response to
an EAP request.
Default value is 30 seconds.
Set the period of time the switch waits for a server response to an
authentication request.
Default value is 30 seconds.
Set the number of authentication that must time-out before
authentication fails and the authentication session ends.
Default value is 2 times.
Set the period of time which clients connected must be re-
authenticated.
Default value is 3600 seconds.
GE-DS-242-PoE Managed Ethernet Switch User Manual
Advertisement
Table of Contents
