Table of Contents
Advertisement
Chapter 4: Web-Based Management
Figure 4-56: QoS Configuration - 802.1Priority
This page includes the following fields:
OBJECT
First Come First Service
All High before Low
Weighted Round Robin
802.1p priority [0-7]
802.1p Priority:
NOTE:
Priority classifiers of the Switch forward packet. COS range is from 0 to 7. Seven
is the high class. Zero is the less class. The user may configure the mapping
between COS and Traffic classifiers.
QoS PerPort Configuration
Configure the priority level for each port. With the drop-down selection item of
Priority Type above being selected as Port-based, this control item will then be
available to set the queuing policy for each port.
104
DESCRIPTION
The sequence of packets sent is depend on arrival order.
The high priority packets sent before low priority packets.
Select the preference given to packets in the switch's higher-priority
queue. These options represent the number of higher priority
packets sent before one lower priority packet is sent.
For example, 8 Highest : 4 SecHigh : 2 SecLow : 1 Lowest means
that the switch sends 8 highest priority packets before sending 4
second high priority packet, before sending 2 second low priority
packet, before sending 1 lowest priority packet.
Set up the COS priority level 0~7—High, Middle, Low, Lowest.
GE-DS-242-PoE Managed Ethernet Switch User Manual
Advertisement
Table of Contents
