Table of Contents
Advertisement
Chapter 4: Web-Based Management
Binding
Let device that has specific IP address and MAC address can use network. We
can set specific IP address, MAC address, VLAN id and port id to bind, and
device can cross switch if all conditions match.
Use binding function; we should enable it first in following page.
In Packet Type / Binding box should select Binding.
OBJECT
DESCRIPTION
1 ~ 247 (max. 247 ACL group)
Group ID
Permit / Deny.
Action
Permit : Permit packet cross switch.
Deny: Drop packet.
Any / VID.
VLAN
Any: Any Vlan id.
VID: 1~4094. A certain vlan id.
IPv4 / Non-IPv4 / Binding
Packet Type
IPv4: Set Ipv4 packet field.
Non-IPv4: Set non-Ipv4 packet field.
Binding: Set binding entry.
**:**:**:**:**:**
MAC Address
* is represent a digit from 0~9 and A~F,
*** is range from 0 to FF.
***.***.***.***
IP Address
* is represent a digit from 0~9,
*** is range from 0 to 255.
Source port id, from 1~26.
Port Id
You create ACL and Binding groups.
Current List
112
GE-DS-242-PoE Managed Ethernet Switch User Manual
DEFAULT VALUE
Permit
Any
IPv4
00:11:22:33:44:55
0.0.0.0
1
Advertisement
Table of Contents
