State Activity - Interlogix GE-DS-242-PoE User Manual

State Activity

Having set up the LACP aggregator on the tab of Aggregator Setting, you can
configure the state activity for the members of the LACP trunk group. You can
tick or cancel the checkbox beside the state label. When you remove the tick
mark of the port and click the Apply button, the port state activity will change to
Passive.
Figure 4-46: State Activity of Switch 1
This page includes the following fields:
OBJECT
Active
Passive
GE-DS-242-PoE Managed Ethernet Switch User Manual
DESCRIPTION
The port automatically sends LACP protocol packets.
The port does not automatically send LACP protocol packets, and
responds only if it receives LACP protocol packets from the opposite
device.
Chapter 4: Console Management
91