Interlogix GE-DS-242-PoE User Manual page 103

The IGMP Type codes are shown below:
Type Meaning
0x11 Membership Query (if Group Address is 0.0.0.0).
Specific Group Membership Query (if Group Address is
0x11
Present).
0x16 Membership Report (version 2).
0x17 Leave a Group (version 2).
0x12 Membership Report (version 1).
IGMP packets enable multicast routers to keep track of the membership of
multicast groups, on their respective sub networks. The following outlines what is
communicated between a multicast router and a multicast group member using
IGMP.
A host sends an IGMP "report" to join a group.
A host will never send a report when it wants to leave a group (for version 1).
A host will send a "leave" report when it wants to leave a group (for version 2).
Multicast routers send IGMP queries (to the all-hosts group address: 224.0.0.1)
periodically to see whether any group members exist on their sub networks. If
there is no response from a particular group, the router assumes that there are
no group members on the network.
The Time-to-Live (TTL) field of query messages is set to 1 so that the queries will
not be forwarded to other sub networks.
IGMP version 2 introduces some enhancements such as a method to elect a
multicast queried for each LAN, an explicit leave message, and query messages
that are specific to a given group.
The states a computer will go through to join or to leave a multicast group are
shown below:
GE-DS-242-PoE Managed Ethernet Switch User Manual
Chapter 4: Console Management
99