Access Control List - Interlogix GE-DS-242-PoE User Manual

Chapter 6: Command Line Interface

Access Control List

Packets can be forwarded or dropped by ACL rules include Ipv4 or non-Ipv4. The
Managed Switch can be used to block packets by maintaining a table of packet
fragments indexed by source and destination IP address, protocol, and so on.
Ipv4 ACL commands
no acl
Description:
Delete ACL group.
Syntax:
no acl <1-220>
Parameters:
<1-220> specifies the group id.
e.g. no acl 1
no acl count
Description:
Reset the ACL group count.
Syntax:
no acl count <GroupId>
Parameters:
GroupId: <1-220> specifies the group id.
GE-DS-242-PoE Managed Ethernet Switch User Manual 185