Table of Contents
Advertisement
OBJECT
Port QinQ
QinQ Uplink
Q-in-Q Tunnel Setting
Business customers of service providers often have specific requirements for
VLAN IDs and the number of VLANs to be supported. The VLAN ranges required
by different customers in the same service-provider network might overlap, and
traffic of customers through the infrastructure might be mixed. Assigning a unique
range of VLAN IDs to each customer would restrict customer configurations and
could easily exceed the VLAN limit (4096) of the IEEE 802.1Q specification.
Using the QinQ feature, service providers can use a single VLAN to support
customers who have multiple VLANs. Customer VLAN IDs are preserved, and
traffic from different customers is segregated within the service-provider network,
even when they appear to be in the same VLAN. Using QinQ expands VLAN
space by using a VLAN-in-VLAN hierarchy and retagging the tagged packets. A
port configured to support QinQ is called a QinQ user-port. A port configured to
support QinQ Uplink is called a QinQ uplink-port.
Figure 4-32: Q-in-Q Tunnel Setting interface
To configure QinQ Port
1. Enable global QinQ function: select QinQ enable "Enable".
GE-DS-242-PoE Managed Ethernet Switch User Manual
DESCRIPTION
Check: Sets the Port to QinQ mode. Or the port operates in its
normal VLAN mode.
Default: Un-check.
Configures IEEE 802.1Q tunneling (QinQ) for an
Check
uplink port to another device within the service
provider network.
Configures IEEE 802.1Q tunneling (QinQ) for a client
Cancel
access port to segregate and preserve customer
VLAN IDs for traffic crossing the service provider
network.
Chapter 4: Console Management
71
Advertisement
Table of Contents
