Table of Contents
Advertisement
Figure 4-65: System information \ Misc Configuration\ 802.1x Protocol
After enabling the IEEE 802.1X function, you can configure the parameters of
this function.
Figure 4-66: 802.1x System Configuration interface
This page includes the following fields:
OBJECT
IEEE 802.1x Protocol:
Radius Server IP:
Server Port:
Accounting Port:
GE-DS-242-PoE Managed Ethernet Switch User Manual
DESCRIPTION
Enable or disable 802.1x protocol.
Assign the RADIUS Server IP address.
Set the UDP destination port for authentication requests to the
specified RADIUS Server.
Set the UDP destination port for accounting requests to the
specified RADIUS Server.
Chapter 4: Console Management
119
Advertisement
Table of Contents
