Interlogix GE-DS-242-PoE User Manual page 115

OBJECT DESCRIPTION
Set this field if Packet Type is IPv4, else ignore.
Port
0~65535
If UDP port not find in UDP field, you can direct assign
number.
Source port id, from 1~26, 0 means don't care.
Port Id
You create ACL and Binding groups.
Current List
Non-IPv4 ACL
In Packet Type / Binding box should select Non-IPv4
OBJECT DESCRIPTION
1 ~ 247 (max. 247 ACL group)
Group ID
Permit / Deny.
Action
Permit: Permit packet cross switch.
Deny: Drop packet.
Any / VID.
VLAN
Any: Any VLAN ID.
VID: 1~4094. A certain VLAN ID.
IPv4 / Non-IPv4 / Binding
Packet Type
IPv4: Set Ipv4 packet field.
Non-IPv4: Set non-Ipv4 packet field.
Binding: Set binding entry.
Set this field if Packet Type is Non-IPv4, else ignore.)
Ether Type
Any / ARP(0x0806) / IPX(0x8137)
Set this field if Packet Type is Non-IPv4, else ignore.)
Type
0~0xFFFF
If ether type not find in Ether Type field, you can direct
assign number.
You create ACL and Binding groups.
Current List
GE-DS-242-PoE Managed Ethernet Switch User Manual
Chapter 4: Console Management
DEFAULT VALUE
0
DEFAULT VALUE
Permit
Any
IPv4
Any
111