Interlogix GE-DS-242-PoE User Manual page 114

Chapter 4: Web-Based Management
OBJECT DESCRIPTION
Set this field if Packet Type is IPv4, else ignore.
Src IP Address
Any / IP and Mask
Any: Any IP address.
IP : A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255
Notice: This is not subnet mask.
Set this field if Packet Type is IPv4, else ignore.
Dst IP Address
Any / IP and Mask
Any: Any IP address.
IP : A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255
Set this field if Packet Type is IPv4, else ignore.
IP Fragment
Uncheck / Check
Uncheck: Not check IP fragment field.
Check: Check IP fragment field.
Set this field if Packet Type is IPv4, else ignore.
L4 Protocol
Any / ICMP(1) / IGMP(2) / TCP(6) / UDP(17)
Set this field if Packet Type is IPv4, else ignore.
Protocol
0~255.
If protocol not find in L4 Protocol field, you can direct
assign number.
Set this field if Packet Type is IPv4, else ignore.
TCP
Any / FTP(21) / HTTP(80)
Set this field if Packet Type is IPv4, else ignore.
Port
0~65535
If TCP port not find in TCP field, you can direct assign
number.
Set this field if Packet Type is IPv4, else ignore.
UDP
Any / DHCP(67) / TFTP(69) / NetBios(137)
110 GE-DS-242-PoE Managed Ethernet Switch User Manual
DEFAULT VALUE
Any
Any
Uncheck
Any
Any
Any