Table of Contents
Advertisement
Chapter 4: Web-Based Management
Figure 4-26: Static VLAN interface
This page includes the following fields:
OBJECT
VLAN Name
Group ID
Port
Member
All unselected ports are treated as belonging to another single VLAN. If
NOTE:
the port-based VLAN is enabled, the VLAN-tagging is ignored.
802.1Q VLAN
Tagged-based VLAN is an IEEE 802.1Q specification standard. Therefore, it is
possible to create a VLAN across devices from different switch venders. IEEE
802.1Q VLAN uses a technique to insert a "tag" into the Ethernet frames. Tag
contains a VLAN Identifier (VID) that indicates the VLAN numbers.
62
DESCRIPTION
Use this optional field to specify a name for the VLAN. It can be up
to 16 alphanumeric characters long, including blanks.
You can configure the ID number of the VLAN by this item. This field
is used to add VLANs one at a time. The VLAN group ID and
available range is 2-4094.
Indicate port 1 to port 26.
Add
Defines the interface as a Port-Based member of a
VLAN.
Remove
Forbidden ports are not included in the VLAN.
GE-DS-242-PoE Managed Ethernet Switch User Manual
Advertisement
Table of Contents
