Interlogix GE-DS-242-PoE User Manual page 201

poe priority
Description:
Set port priority for the power supply management.
The command is configurable while "poe limit-mode" is set to "Port Priority"
Command Level:
Global Configuration
Syntax:
poe priority { Critical | High | Low} [<port-list>]
Parameters:
{Critical | High | Low}
 Critical - Indicates that operating the powered device is high.
 High- Indicates that operating the powered device has medium priority.
 Low- Indicates that operating the powered device has low priority
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example:
Switch(config)# poe priority low 1
Switch(config)# show poe status 1
Port Admin
Port1 Enable
GE-DS-242-PoE Managed Ethernet Switch User Manual
Oper Priority Power Limit[W]
on Low 15.4
Chapter 6: Command Line Interface
Current
Current[mA]
Consumption [W]
13.4 279
Device
Class
0
197