BR/BD 100/250 R BP / RI
5.3 Setup menu
5.3.2.3
Cleaning module and lifting module parameters
Access to
SETUP MENU
(See Chapter 5.2.1)
System parameters
and drive module
(See Chapter 5.2.2)
Note:
If the i-button is not pressed for 30 seconds the program automatically switches back to
Activate parameter setup module
(flashing)
The unit must then be restarted as described in Chapter 5.3.2.1.
Service Manual 08.2007
Basic settings and service procedures
Display
Activate module
parameter setup
(flashing)
Display
Parameter menu
lifting module
Display
return to SETUP
module selection?
yes
yes
Display
max. speed
M2/D-S: 30%
max. speed
M2/U-S: 30%
Change and save
system parameters
(See Chapter 5.3.3)
no
yes
no
no
Page 97 / 171