Print Reports At Specified Time (Pset) - Panasonic KX-TVS125 Installation Manual

3.
Type the current date. For the year, type the last 2 digits.
Note
Enter the exact time and date. This command cannot be used when either the System or
the Message Manager is accessing the time setting feature.
7.2.5

Print Reports at Specified Time (PSET)

Use the PSET command to issue system usage reports (Disk Usage Report, Port Usage
Report, Call Account Report) at a specified time each day. A printer or data terminal must be
connected to the VPS at the RS-232C port for the reports to be printed or displayed.
1.
Type PSET, then Press RETURN.
$ PSET
Report Print Out Service [ Disable ]
1 : Enable 2: Disable :=
2.
Type [1] to enable this function or Type [2] to disable it.
Enter The Print Out Time (HH:MM, AM/PM) :=
3.
Type the time to print the reports.
Note
The reports will be displayed only if the system is in the mode where you see the following
prompt:
>
7.2 UTILITY COMMANDS
Installation Manual 207