Table of Contents
Advertisement
4.5 DPT INTEGRATION FEATURES AND SETUP PROCEDURES FOR THE PANASONIC KX-TA1232 AND KX-TD
4.5.5
Live Call Screening Private/Hands-Free Mode
Assignment via Station Programming
This program assigns a VPS response for when a message is being left in a mailbox. It
determines whether an alert tone is sent or whether the recorded message is played through
the built-in speaker of the extension. The default mode is hands-free. (This is a station level
program and should be done at each individual telephone.)
PC programming is also available for KX-TD500 users (see 4.5.6 Live Call Screening
Assignment via PC Programming).
1.
Enter Station Programming:
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Dial the code for the mode you want this telephone to have.
Hands-Free = 71
Private = 72
Screen output: Hands-Free or Private
3.
Press STORE.
4.
To exit the Station Programming mode, Press the PROGRAM button or lift the handset.
5.
Repeat these steps for each telephone.
Conditions:
A single-line telephone that is connected to the same extension as a proprietary telephone
can also be used to monitor an incoming message. Be sure that Live Call Screening on the
connected proprietary telephone has been activated. This feature is useful when you are using
a cordless telephone. The handset sounds an alert tone to let you know that a message is
being recorded. To intercept the call, flash the hook.
None
Installation Manual
135
Advertisement
Table of Contents
Troubleshooting
