Live Call Screening Button Assignment - Panasonic KX-TVS125 Installation Manual

4.6 DPT INTEGRATION FEATURES AND SETUP PROCEDURES FOR THE PANASONIC KX-TDA/KX-TAW
4.6.7

Live Call Screening Button Assignment

For the Live Call Screening feature to work at an extension, the extension must have an LCS
button on it and the button must be lit at the time of the message reception. This button must
either be a DSS/BLF or CO button with a lamp. Follow the procedure below to assign an LCS
button on an extension. (This is station level programming and should be done at each
individual phone.) PC programming is also available (see 4.6.6 Live Call Screening
Assignment via PC Programming).
1.
Enter Station (Personal) Programming:
With the phone on-hook, Press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2.
Press the desired Flexible (CO or DSS/BLF) button you want to assign as the LCS
button.
3.
Press [92].
Screen output: LCS
4.
Press STORE.
5.
Press the PROGRAM button or lift the handset to exit the Station (Personal)
Programming mode.
6.
Repeat these steps for each telephone.
Conditions:
148 Installation Manual
This button must be assigned and lit for LCS to
operate. To light this, press the button and enter the
LCS password (see 4.6.2 Live Call Screening
Password Assignment).