Print Reports At Specified Time (Pset); Error Log Display (Elog) - Panasonic KX-TVP50E Installation Manual

1.
Type TIME, then Press RETURN.
$ TIME
Current time is 12:34, PM
2.
Type the current time.
Current date is TUE 3-AUG-2002
Enter new date (DD-MM-YY) : =
3.
Type the current date. For the year, type the last 2 digits.
Note
Enter the exact time and date. This command cannot be used when either the System
or the Message Manager is accessing the time setting feature.

7.2.5 Print Reports at Specified Time (PSET)

This command is used to issue system usage reports (Flash Memory Usage Report/Port Usage
Report/Call Account Report) at a specified time each day by entering the PSET command. A
printer or data terminal must be connected to the VPS at the RS-232C port for the reports to be
printed or displayed.
1.
Type PSET, then Press RETURN.
$ PSET
Report Print Out Service [ Disable ]
1 : Enable 2: Disable :=
2.
Type [1] to enable this function or Type [2] to disable it.
Enter The Print Out Time (HH:MM, AM/PM) :=
3.
Type the time to print the reports.
Note
The reports will be displayed only if the system is in the mode where the ">" prompt
is displayed.

7.2.6 Error Log Display (ELOG)

This command is used when diagnosing VPS problems. When selected, this command will
display an error log.
Installation Manual
Enter new time (HH:MM, AM/PM) : =
SYSTEM MAINTENANCE AND TROUBLESHOOTING
121