A1 System Features - Panasonic KX-TVS125 Installation Manual

A1 SYSTEM FEATURES

A1 SYSTEM FEATURES
The Voice Processing System has many features that are available to the System
Administrator, the System Manager, and/or System Subscribers. The Table A-1 lists and
briefly describes each key VPS system feature. In addition, references to specific sections of
this manual and the Subscriber's Guide are provided in the references column that pertains to
each feature listed. The specific procedure steps required to initiate, access, or utilize each
feature are detailed at these references.
Note
Depending on the model and/or the software version of the connected PBX, you may not
be able to utilize some of the features available only with DPT Integration. For more
information, call National Parts Center at 1-800-833-9626.
Table A-1
FEATURE
Alternate a group of extensions, which require a
different call transfer sequence than normal,
Extension Group
placed into a separate group.
Auto creates mailboxes by obtaining extension
numbers from the Panasonic KX-T series
Configuration
telephone system that uses DPT Integration.
(DPT Integration
Also sets the time and date automatically by
Only)
obtaining time information from the PBX.
Auto Forwarding
moves or copies unretrieved messages from
one mailbox to another, after a specified
period of time. This service is only available to
subscribers (you cannot auto forward
messages to the System Group Distribution
Lists). Class of Service programming
determines the mailboxes that can use this
feature. Messages marked as "private"
cannot be forwarded. Also, a message is
never forwarded to the original sender of the
message.
242 Installation Manual
DESCRIPTION REFERENCES
• See "Dialing Parameters" in
3.2.4 PBX Interface
Parameters.
• See "Alternate Extension
Assignment" in B5.1
Automated Attendant
Parameters.
• See "Alternate Extension
Group" in the Glossary.
• See "System Components" in
1.3.2 System Components.
• See 4.1 GUIDELINES FOR
DPT INTEGRATION.
• See "Creating Mailboxes" in
5.1.3 Starting the Quick Setup.
• See "The length of mailbox
numbers" in 5.1.3 Starting the
Quick Setup.
• See "Auto Configuration" in the
Glossary.
• See "Private Message" in this
Table.
• See "Authorization for Auto
Forwarding" in Table B-7 in B3
SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
• See "Auto Forwarding" in the
Glossary.