B7 System Administration-Hardware Settings; B7.1 Rs-232C Parameters - Panasonic KX-TVS125 Installation Manual

B7 SYSTEM ADMINISTRATION—HARDWARE
SETTINGS
For System Administration (system setup, mailbox setup, and system diagnosis), an RS-232C
terminal must be connected to the serial interface of the VPS.
To access the menu for Hardware Setting, follow the menu path as shown:
System Administration Top Menu-1-6
B7.1 RS-232C Parameters
To access the menu for RS-232C Parameter, follow the menu path as shown:
System Administration Top Menu-1-6-1
Table B-40
Parameter
Baud Rate
Word Bit
Length
Parity
Stop Bit
Length
B7 SYSTEM ADMINISTRATION—HARDWARE SETTINGS
Value Range
(Default)
1. 300 bps Specifies the speed at which the data is transferred in
2. 600 bps bits per second.
3. 1200 bps
4. 2400 bps
5. 4800 bps
6. 9600 bps
7. 19200 bps
8. 38400 bps
(9600)
1. 7 bits Defines the number of bits in each byte or character.
2. 8 bits
(8 bits)
1. None Specifies the parity to use for error detection.
2. Odd
3. Even
(None)
1. 1 bit Specifies the number of bits used to signify the end of
2. 2 bits the byte.
(1 bit)
Description/Function
Installation Manual 345