Backing Up The System - Panasonic KX-TVS125 Installation Manual

6.3 BACKING UP THE SYSTEM

6.3 BACKING UP THE SYSTEM
1.
Choose the Utility Command. Type [SAVE], then Press ENTER. See screen output
below.
From System Administration Top Menu:
Enter The Number : = 3
Utility Command
$ SAVE
VPS DISK Data Save ( VPS -> PC : Xmodem )
1: Program
2: Parameters
3: System Prompts
4: User Prompts-1
5: User Prompts-2
6: Custom Service Menus
7: Personal Greetings
8: Company Greetings
Select No. : = 2
2.
To start, Press [2] and then ENTER.
3.
Press RETURN or ENTER.
Following steps are for HyperTerminal as an example.
4.
Select Receive File from the Transfer Menu.
5.
Specify a folder where data is to be saved (if necessary, use "Browse").
6.
Select Xmodem as the protocol to save data.
7.
Click "Receive".
8.
Enter desired filename and click "OK".
The file transfer screen appears and shows download progress. Download time will
vary depending on the communication speed and file sizes.
"SAVE Completed" will appear on the screen when the file has been saved. Continue
saving the other items as needed. It is not necessary to save the "Program" or
"System Prompts" because they are resident on the hard drive and cannot be
altered. We do recommend all other data be saved including User Prompt 1 and User
Prompt 2 (if they have been recorded).
Notes
Recorded caller names for the Caller Name Announcement (System/Personal) cannot be
saved by the above procedure, only Caller ID numbers can be saved. When the saved
198 Installation Manual