Table of Contents
Advertisement
3.3.3
KX-TD500 Programming for Inband Integration
Whenever possible, we recommend that you use DPT Integration. However, in some cases,
this is not possible. In the following situations, you need to use Inband Integration:
•
Your PBX is a third-party telephone system.
•
You have a KX-TD500, but all the extension cards are analog types.
•
You have a KX-TD500, but the DHLC/DLC cards are ancient versions (therefore,
cannot support DPT Integration).
1.
Assignment of the extension card to be connected to the VPS
a)
Go to the "1-1 Slot Assignment" screen.
b)
Assign the slot card type to be installed to "DHLC", "HLC", "SLC", "ESLC", or
"SLC-M" SLT interface supports.
c)
Click "Apply" to save the slot card type assignment.
d)
Set "Card Status" to "INS".
3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs
Screen output:
Installation Manual
75
Advertisement
Table of Contents
Troubleshooting
