Two-Way Recording (Twr) Button Assignment; Two-Way Transfer (Twt) Button Assignment - Panasonic KX-TVS125 Installation Manual

4.6 DPT INTEGRATION FEATURES AND SETUP PROCEDURES FOR THE PANASONIC KX-TDA/KX-TAW
4.6.8

Two-Way Recording (TWR) Button Assignment

For the Two-Way Recording feature to work at an extension, the extension must have a TWR
button on it. This button must either be a DSS/BLF or CO button with a lamp. Follow the
procedure below to assign a TWR button on an extension. (This is station level programming
and should be done at each individual phone.) PC programming is also available (see 4.6.12
Button Assignment via PC Programming).
1.
Enter Station (Personal) Programming:
With the phone on-hook, Press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2.
Press the desired Flexible (CO or DSS/BLF) button that you want to assign as the TWR
button.
3.
Press [90].
Screen output: 2WAY-REC-
4.
Enter a Voice Mail floating extension number.
Screen output: 2WAY-REC- _ _ _
(_ _ _ = The Voice Mail floating extension number you entered).
5.
Press STORE.
6.
Press the PROGRAM button or lift the handset to exit the Station (Personal)
Programming mode.
7.
Repeat these steps for each telephone.
Conditions:
4.6.9

Two-Way Transfer (TWT) Button Assignment

For the Two-Way Transfer feature to work at an extension, the extension must have a TWT
button on it. This button must either be a DSS/BLF or CO button with a lamp. Follow the
procedure below to assign a TWT button on an extension. (This is station level programming
and should be done at each individual phone.) PC programming is also available (see 4.6.12
Button Assignment via PC Programming).
1.
Enter Station (Personal) Programming:
With the phone on-hook, Press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2.
Press the desired Flexible (CO or DSS/BLF) button that you want to assign as the TWT
button.
3.
Press [91].
Screen output: 2WAY-Xfr-
4.
Enter a Voice Mail floating extension number.
Screen output: 2WAY-Xfr- _ _ _
(_ _ _ = The Voice Mail floating extension number you entered).
5.
Press STORE.
This button must be a flexible (CO or DSS/BLF)
button to be programmed as a TWR button. When all
Voice Mail ports are busy and this key is pressed, the
user will hear reorder tone.
Installation Manual 149