Table of Contents
Advertisement
A1 SYSTEM FEATURES
Table A-1
FEATURE
Message
allows a subscriber to check the status of
messages that have been sent. The sending
Delivery Status
subscriber has the option of canceling any of
the messages after checking their status. If a
recorded message has not been received,
the VPS will voice report the following: the
message's destination mailbox number and
its contents.
Message delivery status information is
automatically deleted after the message has
been received by the subscriber, or when the
subscriber cancels the delivery, or when a
new message arrives after 84 delivery status
messages have been stored in the
subscriber's mailbox (the oldest status
message is always deleted first).
Message
allows incoming calls to be received by either
a subscriber's regular or interview mailbox.
Reception Mode
This mode is effective for: (1) Incomplete Call
Handling Service (when the subscriber's line
is busy, or he cannot take the call, or when he
has enabled Call Blocking), and (2) when the
transfer destination of calls is set to a Logical
Extension.
permits the subscriber to scan the first 4 s of
Message Scan
each message. The subscriber can replay the
previous message, play the next message, or
play the entire message.
258
Installation Manual
DESCRIPTION
REFERENCES
•
See 3.2 Checking Mailbox
Distribution in the Subscriber's
Guide.
•
See "Interview Service" and
"Logical Extension (All Calls
Transfer to Mailbox)" in this
Table.
•
See "All Calls Transfer to
Mailbox" in Table B-4" in B2
SYSTEM
ADMINISTRATION—
MAILBOXES.
•
See 4.4 Message Reception
Mode in the Subscriber's
Guide.
•
See "Message Scanning with
Information" in Table B-7" in B3
SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
•
See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
•
See "Scanning Messages" in
the Glossary.
•
See 2.1 Receiving Messages
in the Subscriber's Guide.
Advertisement
Table of Contents
Troubleshooting
