Advanced Mode, Select; Alphanumeric Field Separator - Intermec 3440 User Manual

Advanced Mode, Select

Purpose: Instructs the printer to operate in Advanced mode.
Default: n = 0
Syntax:
<ESC>C n
n = 0
n = 1
Notes: The field pointer designates the first field in format 0. Page 0 is the default
page.
You will lose all previously host-entered data when you switch operating
modes.

Alphanumeric Field Separator

Purpose: Increments or decrements alphanumeric characters within a field-separated
region. You must enclose the data between two sets of <GS> commands:
<GS>data<GS>
Syntax:
<GS>
Alphanumeric characters are 0 to 9 and A to Z. The order of the characters
is as follows: 0, 1, 2...8, 9, A, B, C...Y, Z, 0, 1...9, A, B....
Notes: You may have more than one region in a field as long as they do not
overlap. Each region independently increments or decrements according to
the increment or decrement value specified for the field. The length of data
does not change. Rather, the values increment or decrement as in an
odometer. For example, 9 increments to 0, and Z increments to A.
This command marks the region of characters to increment or decrement,
but it does not actually increment or decrement. The printer ignores any
non-alphanumeric characters within this region.
C o d e 3 9
N
HelvC ugFont
Specifies 5.0 mil (0.005 inch) dot size.
Specifies 2.5 mil (0.0025 inch) dot size.
Print Mode Commands
*1233*
FG 9pt Italic
6
6-21