3440 Bar Code Label Printer User's Manual
Data Source for Format in a Page, Define
Purpose:
Defines a data source for a format assigned to a page position.
Default:
n = 0
m1 = a
m2 = 0
Syntax:
e n [ ,m1 ][ ,m2 ];
When n = 0, the format receives its data during Print mode.
When n = 1, the format is a slave of another format within this page.
m1 is the position of the master format within the page. The default is a.
m2 is the data offset to apply to the slave format. The default is 0. You can
only offset data delimited by numeric field separator <FS> or alphanumeric
field separator <GS>.
Notes:
The format ID must be the same for both the master and slave formats.
Field, Delete
Purpose:
Deletes field n from the format.
Default:
n = 0
Syntax:
D n
Values for n range between 0 and 199.
Notes:
You cannot delete the last field in a format. If you delete the current field,
the field pointer points to the next field. If you delete a master field, you
also delete all slave fields of that master field.
6-72
*1233*
FranklinGothic
FG 9pt Italic
*1233*