Format, Select - Intermec 3440 User Manual

3440 Bar Code Label Printer User's Manual

Format, Select

Purpose: Selects a format for data entry or printing.
Default: n = 0
Syntax:
<ESC>E n [ ,m ]
To select a format, n is a numeric format ID ranging from 0 to 99. The
printer starts imaging the label as soon as it receives the command to select
a format.
If you select a page other than 0, n is an alphabetic format position within
the page with a range from a to z.
When you enable the ,m parameter, the printer only reimages the fields that
change for subsequent prints. Otherwise, the printer reimages the entire
label. If you set ,m to 0, you disable it. If you set ,m to non-zero, you disable
it.
Notes: After you select the format, the field pointer points to the lowest numbered
data entry field.
The printer must be able to completely image a label, within the available
number of image bands, for the reimaging command to work and retain the
image.
The printer clears all host entered/variable data from this format.
The printer generates an error code (36) if you enter an invalid format
number.
6-28
*1233*
FranklinGothic
FG 9pt Italic
*1233*