Maintenance Schedule - Intermec 3440 User Manual

3440 Bar Code Label Printer User's Manual

Maintenance Schedule

Clean your printer regularly to maintain the quality of your labels and
extend the life of your printer. This table contains suggestions for cleaning
the printer. Use the illustration to locate the parts you need to clean.
Printer Component
Printhead
Printer Cover
Drive roller and tear bar
Media path (not shown)
Edge guide
Upper media guide
Lower media guide
Thermal transfer ribbon (TTR)
assist roller
Self-strip roller
Label gap sensor (not shown)
Label mark sensor (not shown)
Label taken sensor
Pinch roller
3-4
1233*
FranklinGothic Helv Condensed
FG 9pt Italic
Maintenance Period
Inspect after every roll of media. Clean after
every roll (or 6,000 inches) of media or more
often if necessary.
Clean as necessary.
Clean after every five rolls of media. If you are
using hi-tack adhesive, you must clean after
every roll of media. If you are using tag stock
or continuous media, you may want to clean
after every five rolls of media or as necessary.
Clean more often in environments that are
harsh or dusty.
*1233*