HelvC
Field Data, Define Source
Purpose:
Defines a data source for the current field and how many characters are in
the field.
n = 0,20
Default:
n = 0,30
Syntax:
d n [ ,m1 ][ ,m2 ];
d0[,m1] and d1[,m1];
You enter optional data in Print mode. ,m1 is the maximum number of data
(up to 3550) that you can enter into this field. The default for ,m1 is 20
characters for bar code fields, and 30 characters for human-readable fields.
d2,[m1][,m2];
You copy data into this field from field ,m1. You must define the field before
you can use it. ,m2 is an optional positive integer numeric field offset that
can range from 0 to 9999, with 0 as the default. You can only offset data
delimited by numeric field separator (FS) or alphanumeric field separator
(GS). A bar code field cannot copy data from a human-readable field, but a
human-readable field can copy data from a bar code field.
d3,[m1];
Fixed data m1 is stored as part of the format and you use it every time you
print the current field. The maximum number of characters in a field
(including nonprinting characters) is 250. You can enter up to 3550
characters in 2D fields. You cannot change entered data with print
commands.
Field Direction, Define
Purpose:
Defines the field rotation.
Default:
n = 0
Syntax:
f n
n = 0
n = 1
n = 2
n = 3
C o d e 3 9
N
ugFont
Human-readable fields
All fields except human-readable and JIS-ITF
Horizontal
Rotated 90 degrees counterclockwise from horizontal
Rotated 180 degrees counterclockwise from horizontal
Rotated 270 degrees counterclockwise from horizontal
Program Mode Commands
*1233*
FG 9pt Italic
6
6-73