Box Field, Create Or Edit; Character Bitmap Origin Offset, Define - Intermec 3440 User Manual

HelvC

Box Field, Create or Edit

Purpose: Accesses or creates a box field.
Default: n = 0
Syntax:
W n [ ,name ]
Values for n range between 0 and 199.
The ,name parameter is an optional field. The field can be up to eight ASCII
characters, but cannot start with a numeric character.
Notes: Parameters for the default field:
Parameter
Field origin
Field direction
Box length
Box height
Box width

Character Bitmap Origin Offset, Define

Purpose: Defines the offset, to the right, of all characters in a font. If you define each
character's width in columns, with the first column numbered 0, then the
origin of each character is at the column with the same number as n. For
example, n = 2 shifts the character origins over two columns to the right.
n = 0
Default:
Syntax:
X n
Values for n range between 0 and 800.
Notes: For bitmap fonts only.
C o d e 3 9
N
ugFont
Syntax
o
f
l
h
w
Program Mode Commands
*1233*
FG 9pt Italic
Default
0,0
0 degrees
100
100
1
6
6-69