Changing The Printer Settings; Protocol Selection; Protocol Selection Mode - Intermec 6820 User Manual

SECTION 4

Changing the Printer Settings

" NOTE:
" NOTE:
If your printer configuration matches either of the following conditions
(manufacturing date or control program version #), then you may not
be able to use your printer control panel to reconfigure the printer.
10
Technical Reference
Old printers can be updated with newer control program versions.
Factory defaults are in bold

Protocol Selection

"
Configuration
"
"
"
"

Protocol Selection Mode

both
order they are stored.
LOW BATT
NPCP
CR
19.2K
slashed (4)
FORM FEED
PAPER OUT, HEAD JAM,
6820 Printer User's Guide
Maintenance
4
6820 Printer
LINE FEED
in the
4-7