Intermec 3440 User Manual page 199

HelvC
Select Interleaved 2 of 5. Printer enters check digit.
c2,1
Select Interleaved 2 of 5. Printer enters check digit.
c2,2
Code 2 of 5
Select Code 2 of 5. Default for ,m is 0.
c3[, m ]
Select Code 2 of 5. 3-bar start/stop code.
c3,0
Select Code 2 of 5. 2-bar start/stop code.
c3,1
Codabar
Select Codabar. Default for ,m is 0.
c4[ ,m ]
Valid start/stop characters range from A to D and from a to d. You can
define them as part of the bar code field or you can download them as part
of the print data. Start/stop characters sent down with printer data override
the characters defined by the bar code field.
Select Codabar. Host enters start/stop codes and printer verifies.
c4,0
Select Codabar. Printer enters start code x and stop code y. x and y can
c4,1, x,y
range from A to D.
Code 11
Select Code 11. The default for ,m is 0.
c5[ ,m ]
Select Code 11. Printer enters 2 check digits.
c5,0
Select Code 11. Printer enters 1 check digit.
c5,1
Select Code 11. Host enters 2 check digits and printer verifies.
c5,2
Select Code 11. Host enters 1 check digit and printer verifies.
c5,3
C o d e 3 9
N
ugFont
Program Mode Commands
*1233*
FG 9pt Italic
6
6-53