Operation on the Machine > Sending
WSD Scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
NOTE
• To use WSD Scan, confirm that the computer used for WSD scanning and the machine is network-connected, and
"WSD Scan" is set to [On] in the network settings.
WSD Scan (page 8-32)
• For information on operating the computer, refer to the computer's help or the operation guide of your software.
Installing the Driver
Installing Driver Software (for Windows 8, Windows 8.1 and Microsoft Windows Server 2012)
1
2
Installing Driver Software (for Windows 7)
1
2
Click [Search] in charms, [Control Panel], and then [View
devices and printers].
Install the driver.
Click [Add a device]. Select the machine's icon and then click [Next].
When the machine's icon is displayed in "Printers" on the [Devices and Printers] screen, the
installation is completed.
Display [Network] in the Start menu.
Click [Start] button on the Windows and then select [Network].
NOTE
When [Network] does not appear in the Start menu, perform the following procedure.
1
Right-click [Start] and click [Property] in the menu that appears.
2
Select the [[Start] menu] tab in the "Task bar and [Start] menu properties" screen, and
click [Customize].
3
When the "Customize [Start] menu" screen appears, select the "Network" check box
and click [OK].
Install the driver.
Right-click the machine's icon and then click [Install].
NOTE
If the "User Account Control" window appears, click [Continue].
If the "Found New Hardware" window appears, click [Cancel].
During the installation, double-click the icon shown on the task bar to display the "Driver
Software Installation" screen. When "Your devices are ready to use" is displayed on the
[Driver Software Installation] screen, the installation is completed.
5-30