Dp Read Action; Skip Blank Page; Quiet Mode - Kyocera TASKalfa 356ci Operation Manual

Hide thumbs Also See for TASKalfa 356ci:

Table of Contents

Using Various Functions > Functions

DP Read Action

When the document processor is used, select the scanning operation for the document processor.

Speed Priority

Quality Priority

When there are blank pages in a scanned document, this function skips the blank pages and prints only pages that are

When set to [High], the level at which blank paper is recognized is higher.

The machine detects blank pages, saving unnecessary printing without the need to check for blank pages in the

Select [Low], [Middle] or [High] in [On].

The originals with punched holes or originals printed on a colored substrate may not be recognized as blank pages.

Lower print and scan speed for quiet processing.

Select this mode when the running noise is uncomfortable.

It is possible to set the use of Quiet Mode for each function, such as copying and sending.

(Value: [Off] / [On])

• The processing speed will be slower than normal when in Quiet Mode.

• This cannot be used when [Prohibit] is set for "Specify for Each Job".

Specify for Each Job (page 8-57)

Gives priority to scanning speed.

Gives priority to image quality at a slightly slower scan speed.

Taskalfa 406ci