Table of Contents
Advertisement
Setup and Registration (System Menu) > System Menu
Function Defaults
[System Menu] key > [Common Settings] > [Function Defaults]
Item
Orig. Orientation (Copy)
Orig. Orient.(Send/Store)
Original Image (Copy)
Org. Image (Send/Store)
Scan Resolution
*2
FAX TX Resolution
Color Selection (Copy)
Color Select.(Send/Store)
File Format
Backgrnd Density (Copy)
BackgrndDens.(Send/Store)
Prevent Bleed-thru (Copy)
Prevent Bleed(Send/Store)
Zoom
Border Erase Default
Border Erase to Back Page
Set the original orientation defaults.
Value: Top Edge on Top, Top Edge on Left, Auto
Set the default original document type for copying.
Value: Text+Photo (Printer), Text+Photo (Magazine), Photo (Printer), Photo (Magazine),
Photo (Photo Paper), Text, Text (Fine Line), Graphic/Map (Printer),
Graphic/Map (Magazine)
Set the default original document type for sending/storing.
Value: Text+Photo, Photo, Text, Text(Fine Line), Text (for OCR)
Select the default scanning resolution.
Value: 600×600dpi, 400×400dpi Ultra Fine, 300×300dpi, 200×400dpi Super Fine,
200×200dpi Fine, 200×100dpi Normal
FAX System 10 Operation Guide
Set the default copying color mode setting.
Value: Auto Color, Full Color, Black & White
Select the default color mode for scanning documents.
Value: Auto Color (Color/Gray), Auto Color (Color/B & W), Full Color, Grayscale,
Black & White
Set the default type of the files.
Value: PDF, TIFF, JPEG, XPS, OpenXPS, High Comp. PDF
Set the default Backgrnd Density (Copy).
Value: Off, Auto, Manual (Darker 5)
Set the default Backgrnd Density (Send/Store).
Value: Off, Auto, Manual (Darker 5)
Set the default value for preventing bleed-through (Copy).
Value: Off, On
Set the default Prevent Bleed (Send/Store).
Value: Off, On
Select the enlarged/reduced default when paper size/sending size changed after the originals
set.
Value: 100%, Auto
Set the default width to be erased as a border.
Value
Metric: 0 to 50 mm (in 1 mm increments)
Inch: 0 to 2" (in 0.01" increments)
NOTE
To specify border erase widths around original, set the value in "Border". To specify border
erase widths in the middle of original, set the value in "Gutter".
Select the Border Erase Method for Back Page of a sheet.
Value: Same as Front Page, Do Not Erase
8-17
Description
*1
Advertisement
Table of Contents
Troubleshooting
