Standard Bin Actuator Assembly Removal - Lexmark X651de Service Manual

7462
Sensor shield assembly removal
1. Remove the inner deflector. See
2. Gently unsnap the sensor shield assembly from the machine.
3. Remove the sensor shield assembly.
Replacement Warning: When replacing the sensor shield assembly, ensure that the spring (A) is properly
aligned and the sensor shield assembly opens and closes properly.

Standard bin actuator assembly removal

1. Remove the laser cover. See
page 4-103
2. Disconnect the connection (A) from the standard bin actuator assembly.
3. Press the tab (B) to release the standard bin actuator assembly from the machine.
4. Remove the standard bin actuator assembly.
Service Manual
4-42
"Inner deflector removal" on page
A
"Laser cover removal (models X651, X652, X654, and X656)" on
or
"Laser cover removal (model X658)" on page
4-18.
4-101.
Previous
Next
Go Back