Lexmark X651de Service Manual page 399

ADF feed drive motor assembly removal
1. Remove the ADF transport motor bracket assembly with cable. See
assembly w/cable removal" on page
2. Unfasten and remove all wires from the ADF feed drive motor assembly.
3. Disconnect the ADF feed motor harness from the feed motor.
4. Remove the E-clip (A) securing one end of the ADF feed / pick roll feed shaft to the ADF feed drive motor
assembly.
5. Remove the bushing from the pick roll feed shaft.
6. Remove the six screws (B) securing the ADF feed motor assembly to the ADF unit assembly.
B
7. Remove the ADF feed motor assembly to include two belts and cable.
4-71.
"ADF transport drive motor bracket
A
Repair information
7462
Previous
Next
Go Back
4-73