Scanner Cooling Fan Removal - Lexmark X651de Service Manual

Scanner cooling fan filter removal
1. Pry the tabs (A) securing the scanner cooling fan filter cover to the flatbed frame.

Scanner cooling fan removal

1. Remove the scanner platen glass cover assembly. See
(models X651, X652, X654 and X656)" on page 4-137
removal (model X658)" on page
2. Disconnect the cooling fan wiring harness from the scanner interface card connector (CN5) assembly.
3. Remove the two screws (A) securing the scanner cooling fan to the flatbed frame.
4. Remove the scanner cooling fan while carefully routing the cable out from the flatbed frame assembly.
"Scanner platen glass cover assembly removal
or
"Scanner platen glass cover assembly
4-136.
7462
Repair information
4-145
Previous
Next
Go Back