Horizontal White Stripes Or Bands (Side To Side Direction) - Lexmark X651de Service Manual

7462

Horizontal white stripes or bands (side to side direction)

Leading edge
Trailing edge
Step
Check the media condition.
1
Load new, dry, and recommended media.
Re-print the defective image.
Does the error continue?
Are the media transfer route and the media path free of
2
contamination and debris?
Check the toner level.
3
Is the toner level normal?
Check the transfer roll assembly for contamination and
4
wear.
Is the above component free of excess wear and
contamination?
Check the printhead assembly for proper connection.
5
Is the above component properly connected?
Perform a print test.
6
Does the problem remain?
Service Manual
2-162
Check Yes
Go to step 2. Problem resolved.
Go to step 3. Remove debris or
contamination.
Go to step 4. Replace the print
cartridge.
Go to step 5. Replace the
transfer roll
assembly.
Go to
"Transfer
roll assembly
removal" on
page 4-53.
Replace the Replace the
printhead connections.
assembly.
Go to
"Printhead
assembly
removal" on
page 4-32.
Contact next Problem resolved.
highest level of
tech support.
Previous
Next
Go Back
No