Lexmark X651de Service Manual page 400

7462
ADF pick roll position cam assembly removal
1. Remove the ADF cover, front. See
2. Remove the ADF feed / pick roll assembly. See
3. Disengage the clip (A) on the shaft arm (B), securing it to the shaft.
4. Remove the two springs attached to the shaft arm (B).
5. Remove the three screws (C) securing the ADF pick roll position cam assembly bracket.
6. Remove the ADF pick roll position cam assembly bracket.
7. Remove it from the shaft.
8. Slide the shaft and ADF pick roll position cam assembly out of the ADF frame.
Service Manual
4-74
"ADF cover, front removal" on page
B B
B
C
4-59.
"ADF feed / pick roll assembly removal" on page
A
B
Previous
4-56.
Next
Go Back