Lexmark X651de Service Manual page 517

Sensor (pass through) with cable removal
1. Remove the 550-sheet frame assembly. See
2. Disconnect the sensor (pass through) cable connector from the 550-sheet controller card.
3. Remove the sensor (pass through) with cable.
550-sheet controller card assembly removal
1. Remove the 550-sheet frame assembly. See
2. Disconnect the three connectors from the 550-sheet controller card assembly.
"550-sheet frame assembly removal" on page
"550-sheet frame assembly removal" on page
7462
4-188.
4-188.
Repair information
4-191
Previous
Next
Go Back