7462
MPF pick roll assembly removal
1. Remove the media turn guide. See
2. Remove the E-clip (A) securing the MPF print roll assembly to the machine.
3. Remove the plastic washer (B).
4. Remove the MPF pick roll assembly.
Replacement Warning: When replacing the MPF pick roll assembly, do not touch the rubber surface.
MPF pick solenoid assembly removal
Note: The MPF lift plate assembly can be detached and allowed to hang by the harness. The connection does
not need to be disconnected.
1. Remove the MPF lift plate assembly. See
2. Remove the side cover, left.
or
page 4-121
3. Remove the six screws (A) securing the metal cover to the machine.
Service Manual
4-26
"Media turn guide removal" on page
"MPF lift plate assembly removal" on page
See"Side cover, left removal (models X651, X652, X654, and X656)" on
"Side cover, left removal (model X658)" on page
A
4-12.
B
A
4-120.
Previous
Go Back
4-25.
Next