7462
6. Remove the screw (C) securing the sensor (ADF document set) to the bracket.
Previous
B
C
Next
Go Back
Switch (ADF closed interlock) removal
1. Remove the ADF cover, rear assembly. See
"ADF cover, rear removal" on page
4-60.
2. Open the ADF unit assembly.
3. Remove the ADF closed interlock harness from the switch.
4. Using a prying tool, press the tabs (A) on either side of the switch, and pull it down through the bottom of
the ADF unit assembly.
A
A
Repair information
4-79