Lexmark X651de Service Manual page 112

7462
Error
code or
message
910.00 Pick arm motor stalled
failure
911.00 Pick arm motor
overrun failure
912.00 Pick arm motor
underspeed failure
913.00 Pick arm motor
overspeed failure
914.00 Pick arm motor no
encoder not detected
failure
914.01 Pick arm motor
overspeed failure.
Service Manual
2-78
Error contents
The pick arm motor has stalled
or become obstructed.
The pick arm motor encoder
continues to detect pulse after
the motor stops.
The pick arm motor does not
rotate at the specified speed.
The pick arm motor does not
rotate at the specified speed.
The pick arm motor encoder
detection is lost during normal
operation
The pick arm motor does not
rotate at the specified speed.
Description/Action Possible repair actions
1. Check all the connections on
the pick arm assembly.
2. Check all the connections on
the system card assembly.
3. Replace the pick arm
assembly if problem remains.
Go to
"Pick arm assembly
removal" on page 4-28.
1. Check all the connections on
the pick arm assembly.
2. Check all the connections on
the system card assembly.
3. Replace the pick arm
assembly if problem remains.
Go to
"Pick arm assembly
removal" on page 4-28.
1. Check all the connections on
the pick arm assembly.
2. Check all the connections on
the system card assembly.
3. Replace the pick arm
assembly if problem remains.
Go to
"Pick arm assembly
removal" on page 4-28.
1. Check all the connections on
the pick arm assembly.
2. Check all the connections on
the system card assembly.
3. Replace the pick arm
assembly if problem remains.
Go to
"Pick arm assembly
removal" on page 4-28.
1. Check all the connections on
the pick arm assembly.
2. Check all the connections on
the system card assembly.
3. Replace the pick arm
assembly if problem remains.
Go to
"Pick arm assembly
removal" on page 4-28.
1. Check all the connections on
the pick arm assembly.
2. Check all the connections on
the system card assembly.
3. Replace the pick arm
assembly if problem remains.
Go to
"Pick arm assembly
removal" on page 4-28.
Previous
Next
Go Back