Lexmark X651de Service Manual page 74

7462
Error
code or
message
242.05 Sensor (pass through)
late jam
Source = Tray 2
242.06 Sensor (pass through)
late jam
Source = Tray 2
242.08 Sensor (pass through)
lingering jam
Source = Tray 2
242.09 Sensor (input) late
jam
Source = Tray 2
242.10 sensor (pass through)
late jam
Source = Tray 2
242.13 Sensor (pass through)
static jam
Source = Tray 2
242.16 sensor (pass through)
late jam
Source = Tray 2
242.17 Media tray pulled jam
Source = Tray 2
242.18 Pick retry timeout
Source = Tray 2
242.19 Pick retry timeout
Source = Tray 2
Service Manual
2-40
Error contents
The media is late reaching the
sensor (pass through) within
the specified time.
The media is late reaching the
sensor (pass through) within
the specified time.
Media reached the sensor
(pass through) within the
specified time but did not clear
it within the specified time.
The media is late reaching the
sensor (input) within the
specified time.
The media is late reaching the
sensor (pass through) within
the specified time.
Media remains on the sensor
(input) during the warm up
sequence.
The media is late reaching the
sensor (pass through) within
the specified time.
A media tray above the source
tray was pulled during the
printing process.
The engine timed out waiting
for the tray 2 to report ready
before the first pick attempt.
The engine timed out waiting
for the tray 2 to report ready
before a pick retry attempt.
Description/Action Possible repair actions
Go to sensor (pass through)
late jam service check.
See
"Sensor (pass through)
late jam service check" on
page 2-142.
Go to sensor (pass through)
late jam service check.
See
"Sensor (pass through)
late jam service check" on
page 2-142.
Go to sensor (pass through)
lingering jam service check.
See
"Sensor (pass through)
lingering jam service check."
on page 2-143.
Go to sensor (input) late jam
service check.
See
"Sensor (input) late jam
service check." on
page 2-128.
Go to sensor (pass through)
late jam service check.
See
"Sensor (pass through)
late jam service check" on
page 2-142.
Go to sensor (pass through)
static jam service check.
See
"Sensor (pass through)
static jam service check" on
page 2-144.
Go to sensor (pass through)
late jam service check.
See
"Sensor (pass through)
late jam service check" on
page 2-142.
1. Remove all media present
in media path.
2. Close all media trays.
Turn the machine off/on.
Turn the machine off/on.
Previous
Next
Go Back