Lexmark X651de Service Manual page 86

7462
Error
code or
message
244.65 Pick motor load error
Source = Media tray 4
244.66 Pick motor
underspeed failure
Source = Media tray 4
244.67 Pick motor overspeed
failure
Source = Media tray 4
Service Manual
2-52
Error contents
The pick motor has failed or
caused high mechanical load
due to paper jam or bind.
The pick motor does not rotate
at the specified speed.
The pick motor does not rotate
at the specified speed.
Description/Action Possible repair actions
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check, clean or replace the
pick rolls for wear and
excess contamination. Go
to
"Pick roll assembly
removal" on page 4-30.
4. Check all connections on
the pick arm assembly.
5. Check all connections on
the system card assembly.
6. Replace the pick arm
assembly if problem
remains. Go to
"Pick arm
assembly removal" on
page 4-28.
7. Replace system card
assembly if problem
remains. Go to
"System
card assembly removal"
on page 4-47.
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check all connections on
the pick arm assembly.
4. Check all connections on
the system card assembly.
5. Replace the pick arm
assembly if problem
remains. Go to
"Pick arm
assembly removal" on
page 4-28.
6. Replace system card
assembly if problem
remains. Go to
"System
card assembly removal"
on page 4-47.
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check all connections on
the pick arm assembly.
4. Check all connections on
the system card assembly.
5. Replace the pick arm
assembly if problem
remains. Go to
"Pick arm
assembly removal" on
page 4-28.
6. Replace system card
assembly if problem
remains. Go to
"System
card assembly removal"
on page 4-47.
Previous
Next
Go Back