Firmware Upgrading Procedure By Updater; Updating Method - Konica Minolta bizhub C35P Service Manual

Field Service Ver. 1.0 May 2010
8. The firmware upgrading procedure starts.
NOTE
• Do not turn off the printer while its firmware is being updated.
• NEVER disconnect the USB memory device from the printer during the firmware
upgrading procedure.
9. The printer is automatically restarted as soon as the firmware is upgraded correctly.
6.3

Firmware upgrading procedure by updater

6.3.1

Updating method

• To update the firmware, perform "Firmware Updater."
A. System requirements
Computer
OS
Available
hard disk space
Memory
Interface
UpdateA0VDXXXXXXX
PROCESSING
DON'T REMOVE MEMORY
Windows • PC with a Pentium 2, 400 MHz or faster processor
(A Pentium 3, 500 MHz or faster processor is recommended.)
Macintosh • Apple Macintosh computer with a PowerPC G3 or later proces-
sor (A PowerPC G4 or later is recommended.)
• Apple Macintosh computer with an Intel processor
Windows • Microsoft Windows XP Home Edition/Professional, Windows
2000, Windows Vista Home Basic/Home Premium/Business/
Enterprise/Ultimate
Macintosh • MacOS X 10.2.8/10.3.x/10.4.x/10.5.x
(We recommend installing the newest patch.)
Windows • Approximately 20 to 26 MB
Macintosh • Approximately 30 to 42 MB
• 128 MB or more
Windows • 10Base-T/100Base-TX/1000Base-T Ethernet
• USB 2.0 (High Speed) compliant
Macintosh • 10Base-T/100Base-TX/1000Base-T Ethernet
6. FIRMWARE REWRITING
A0VDF2E552DA
25