Field Service Ver. 1.0 May 2010
10.17 TONER OUT MODE
A. Use
• Sets whether or not to enable monochrome print when the toner cartridge/Y,M,C
becomes empty.
MODE1: Enables monochrome print.
MODE2: Disables monochrome print.
B. Procedure
• The default setting is MODE1.
10.18 IU YIELD SETTINGS
A. Use
• Sets the life detection timing of the imaging unit.
STANDARD : Detect the imaging unit life (prohibition of printing) as the specification
value.
EXTENSION : Change the threshold value of the imaging unit life (prohibition of print-
ing) detection, and extend the detection timing.
Life (prohibition of printing) threshold value
(consumption rate)
B. Procedure
• The default setting is STANDARD.
"MODE1"/MODE2
STANDARD
105 %
"STANDARD"/EXTENSION
10. SERVICE MODE
EXTENSION
150 %
133