Konica Minolta bizhub C35P Service Manual page 125

9. Utility
E. Coverage Information
• Each coverage information is calculated and displayed based on the description shown
in the following table.
<Coverage information list>
Coverage information
Normalized Coverage
Information <Latest Job>
Normalized Coverage
Information
<Current Toner Cartridge>
Normalized Coverage
Information <Total>
Normalized Color (CMYK)
Coverage Information
Normalized Monochrome
Coverage Information
NOTE
• Coverage information can be used as a guide and may not completely reflect the
actual amount of toner used.
F. How to read consumable/periodic replacement parts (units) counter information.
• The lower left part of the statistics page (
that represent consumable/periodic replacement parts (units) counter information.
The table below explains counter information that is provided by each numerical data.
<Display on the statistics page>
0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0
<Meaning of counter value> (From the left of the numerical values)
No.
1 Number of times a high-capacity toner cartridge (K) has been replaced
Number of times a standard-capacity toner cartridge (K) has been replaced
2
* This item is not available in this machine.
3 Number of times a toner cartridge (K) made by companies other than KMBT has been replaced
90
• Individual average dot coverage of four colors (YMCK) in the last
job is calculated on an A4 basis.
(The average of the ratios of dot space on each page when the
printable area is defined as 100% and shown in 0.1 percent incre-
ments)
• Individual average dot coverage of four colors (YMCK) in the cur-
rent toner cartridges is calculated on an A4 basis.
(The average of the ratios of dot space on each page when the
printable area is defined as 100% and shown in 0.1 percent incre-
ments)
• Individual average dot coverage of four colors (YMCK) is calculated
on an A4 basis for all prints performed after the printer was
installed.
(The average of the ratios of dot space on each page when the
printable area is defined as 100% and shown in 0.1 percent incre-
ments)
• Average dot coverage is calculated on an A4 basis for full color
printing performed after the printer was installed.
(The average of the ratios of dot space on each page when the
printable area is defined as 100% and shown in 0.1 percent incre-
ments)
• Average dot coverage is calculated on an A4 basis for monochrome
printing performed after the printer was installed.
(The average of the ratios of dot space on each page when the
printable area is defined as 100% and shown in 0.1 percent incre-
ments)
in the sample page) shows numerical values
Contents
Field Service Ver. 1.0 May 2010
Contents
0B02