Toner Supply Clutch/Y (Cl4) / Toner Supply Clutch/M (Cl5) Toner Supply Clutch/C (Cl6) / Toner Supply Clutch/K (Cl7) - Konica Minolta bizhub C35P Service Manual

7. OTHER MAINTENANCE ITEM
7.3.24 Toner supply clutch/Y (CL4) / Toner supply clutch/M (CL5)
Toner supply clutch/C (CL6) / Toner supply clutch/K (CL7)
1. Remove the toner cartridge (C,M,Y,K).
See P.6
2. Remove the waste toner bottle.
See P.12
3. Remove the imaging unit (C,M,Y,K).
See P.9
4. Remove the fuser unit.
See P.17
5. Remove the exit cover.
See P.43
6. Remove the left cover.
See P.42
7. Remove the rear right cover.
See P.42
8. Remove the upper cover.
See P.44
9. Remove the operation panel.
See P.44
10. Remove the cooling fan motor.
See P.61
[1]
[3]
64
[2]
[3]
A0VDF2C021DA
Field Service Ver. 1.0 May 2010
11. Remove the screw [1], and remove
the exit drive assy [2].
12. Disconnect two connector [3].