Konica Minolta bizhub C35P Service Manual page 72

Field Service Ver. 1.0 May 2010
8. The result of the firmware transfer is displayed. Click the [Exit].
9. If the firmware was successfully updated, the printer will automatically restart.
<If transferring of the data fails>
1. If transferring of the data fails, the following message appears.
2. Click [OK].
3. Check that the printer is ready and that it is correctly connected, and then click the
[Update again].
6. FIRMWARE REWRITING
A011F2E576DA
A011F2E577DA
A011F2E578DA
37